A cable lock like the # e98891 would be the best option to lock your generator to the Stromberg Carlson Trailer Tray Cargo Carrier for A-Frame Trailers # CC-255 you were looking at, or any other part on your trailer. The cable is 10' in length so you could wrap in through the legs of the tray or just down to the trailer frame. You would still need to use some straps to secure the generator to your tray though. view full answer...
The Aries Round Nerf Bars part # AA200112 have a shipping weight of 48 lbs and shipping dimensions of 69" long x 16" wide x 4" tall. view full answer...
The Tow-Ready trailer connector adapter # 20142 you referenced is designed to work on a range of European import vehicles. This adapter will prevent low current draw on your LED trailer lighting from triggering error messages on your Range Rover Sport dashboard display.
Before installing this adapter it is suggested that you check that your trailer connector's contacts are clean and free or dirt or corrosion. You might also want to apply dielectric grease like # LT37534.
I included a... view full answer...
The brake controller adapters we offer that will work with your 2011 Range Rover Sport are designed to work with specific brake controllers. We do not have a universal adapter that will work with all controllers.
If you have a Tekonsha brake controller like part # 90885 or # 90195, the adapter that will work for you is part # 3035-P. If the brake controller you have in your Range Rover is made by Curt, the adapter you can use is part # C51322. For a Hopkins brake controller you can use... view full answer...
There is not a standard minimum brake lining thickness across all manufactures and within each state. The manufacturer will list a minimum lining depth at which they recommend replacement and so will each state. For example, on a set of 12-1/4" x 5" Dexter Electric Trailer Brakes, they recommend at least 1/16". In order to determine at what thickness the state recommends replacement, you would need to contact your local DMV or DOT.
If you have Dexter 12K Electric Braking Assemblies then... view full answer...
The distance from the hitch pin hole to the sleeve is 2 inches for the Trailer Hitch Extender for 1-1/4" Trailer Hitch Receivers - 7" Long # e68YR. view full answer...
There are a few shanks that are specifically designed to be used in the rise or drop position only, but it will be clearly stated in the product description.
The vast majority of the weight distribution shanks, like the # RP54970 you mentioned can be used in either the rise or drop orientation.
The procedure for determining the necessary rise or drop needed is much like that used for a ballmount, see the linked FAQ article. view full answer...
There are no issues with liability or insurance issues with this hitch part # 76260. Draw-Tite does extensive testing to ensure the safety of the hitch and the vehicle.
This hitch in particular is a great option because the receiver tube is completely hidden behind the bumper. When your hitch is not in use, the bumper cover will install and completely conceal the hitch giving an oem appearance. view full answer...
Go To Results